NovaLab GmbH
Brunsbütteler Damm 446
13591 Berlin

Phone: +49 (0) 30.36 403 36 11
Fax: +49 (0) 30.36 403 36 28
E-mail: info@novalab-gmbh.de

Novalab GmbH - Laborarmaturen & Gartenarmaturen

NovaLab safety shower with ball valve and tie-rod actuation for surface mounting, water connection on all sides via middle of door. Standard embodiment for a door width of 1m. Actuator on the right or left of the door.
Guided by tie rod out with triangular handle and sealable. Redirector with wall flange, ball valve, wall bracket and safety-shower head.
Wall bracket with safety-shower head with 5 or 7 jet orifices and swirl discs, automatic draining by gradient. Replaceable nozzle distribution plate, nickel plated.
Fitting does not self-close. Brass EPS-coated green RAL 6032
Meets the requirements of DIN EN 15154-1 and
BGI/GUV-I 850-0 "Safe working in laboratories".
Includes the "Safety shower" symbol on an adhesive label according to ISO 3864-1,
user information and fastening material.
Connection: Female thread G3/4

Illustration

Flow diagram

 

 

Safety-shower head with 5 nozzle orfices.
Volumetric flow rate approx. 30 l/min at 1 bar flow pressure
Item No.: 70-1720 35

Safety-shower head with 7 nozzle orfices.
Volumetric flow rate approx. 60 l/min at 1.5 bar flow pressure
Item No.: 70-1725 35

as above, however water feed from the rear out of the wall,
Connection: Male thread G3/4B, 
Safety shower with 5 nozzle orfices.
Volumetric flow rate approx. 30 l/min at 1 bar flow pressure
Item No.: 70-1780 35

as above, however water feed from the rear out of the wall,
Connection: Male thread G3/4B,
Safety shower with 7 nozzle orfices.
Volumetric flow rate approx. 60 l/min at 1.5 bar flow pressure
Item No.: 70-1785 35

On request:
Different lengths / extensions.
Embodiment featuring wall bracket with eyelet for additional ceiling fixture.
Embodiment with ball handle instead of the triangular handle.
Other colours or colour combinations.

Accessories  
Connecting-rod extension for large door widths, e.g. 300 mm long.
Item No.: 87-10080194

 

NovaLab safety shower with toggle valve and tie-rod actuation for surface mounting, water connection on all sides via middle of door. Standard embodiment for a door width of 1m. Actuator on the right or left of the door. Guided by tie rod out with triangular handle and sealable. 
Redirector with wall flange, toggle valve, wall bracket and safety-shower head. Wall bracket with safety-shower head with 5 or 7 jet orifices and swirl discs, automatic draining by gradient. Replaceable nozzle distribution plate, nickel plated. Axially sealing valve. Headwork can be replaced without removing the valve body. Fitting does not self-close.
Brass EPS-coated green RAL 6032
Meets the requirements of DIN EN 15154-1 and
BGI/GUV-I 850-0 "Safe working in laboratories".
Includes the "Safety shower" symbol on an adhesive label according to ISO 3864-1,
user information and fastening material.
Connection: Female thread G3/4

Safety-shower head with 5 nozzle orifices,
volumetric flow 30 l/min at 1 bar flow pressure
Item No.: 70-1820 35

Safety-shower head with 7 nozzle orifices,
volumetric flow 60 l/min at 1.5 bar flow pressure
Item No.: 70-1825 35

Illustration

Flow diagram

 


On request:
Different lengths/extensions.
Embodiment featuring wall bracket with eyelet for additional ceiling fixture.
Embodiment with ball handle instead of the triangular handle.
Other colours or colour combinations.

Accessories 
Connecting-rod extension for large door widths, e.g. 300 mm long. 
Item No.: 87-10080194

NovaLab safety shower with ball valve and tie-rod actuation for surface mounting, water connection right/left of the door, Standard door width 1m. Actuator on the right or left of the door. Guided by tie rod, with triangular handle and sealable. Wall flange with ball valve next to the door. Wall flange, wall bracket and safety-shower head above
middle of door. Wall arm with safety-shower head with 5 or 7 jet orifices and swirl discs, automatic draining by gradient. Replaceable nozzle distribution plate, nickel plated. Fitting does not self-close.
Brass EPS-coated green RAL 6032
Meets the requirements of DIN EN 15154-1 and
BGI/GUV-I 850-0 "Safe working in laboratories".
Includes the "Safety shower" symbol on an adhesive label according to ISO 3864-1,
user information and fastening material.

Connection: Female thread G3/4

Safety-shower head with 5 nozzle orifices,
volumetric flow 30 l/min at 1 bar flow pressure
Item No.: 70-1730 35

Safety-shower head with 7 nozzle orifices,
volumetric flow 60 l/min at 1.5 bar flow pressure
Item No.: 70-1735 35

Illustration

Flow diagram

 


On request:
Different lengths/extensions.
Embodiment featuring wall bracket with eyelet for additional ceiling fixture.
Embodiment with ball handle instead of the triangular handle.
Other colours or colour combinations.

NovaLab safety shower with toggle valve and tie-rod actuation for surface mounting, water connection right/left of the door, Standard door width 1m. Actuator on the right or left of the door. Guided by tie rod, with triangular handle and sealable. Wall flange with toggle valve next to the door. Wall flange, wall bracket and safety-shower head above
middle of door. Wall arm with safety-shower head with 5 or 7 jet orifices and swirl discs, automatic draining by gradient. Replaceable nozzle distribution plate, nickel plated.
Axially sealing valve. Headwork can be replaced without removing the valve body. Fitting does not self-close.
Brass EPS-coated green RAL 6032
Meets the requirements of DIN EN 15154-1 and
BGI/GUV-I 850-0 "Safe working in laboratories".
Includes the "Safety shower" symbol on an adhesive label according to ISO 3864-1,
user information and fastening material.

Connection: Female thread G3/4

Safety-shower head with 5 nozzle orifices,
volumetric flow 30 l/min at 1 bar flow pressure
Item No.: 70-1830 35

Safety-shower head with 7 nozzle orifices,
volumetric flow 60 l/min at 1.5 bar flow pressure
Item No.: 70-1835 35

Illustration

Flow diagram




On request:
Different lengths/extensions.
Embodiment featuring wall bracket with eyelet for additional ceiling fixture.
Embodiment with ball handle instead of the triangular handle.
Other colours or colour combinations.

NovaLab safety shower with ball valve and tie-rod actuation for surface mounting, water connection on all sides.
Guided by tie rod, with triangular handle and sealable. Wall flange with ball valve, wall bracket and safety-shower head. Wall arm with safety-shower head with 5 or 7 jet orifices and swirl discs, automatic draining by gradient. Replaceable nozzle distribution plate, nickel plated.
Fitting does not self-close. Brass EPS-coated green RAL 6032
Meets the requirements of DIN EN 15154-1 and
BGI/GUV-I 850-0 "Safe working in laboratories".
Includes the "Safety shower" symbol on an adhesive label according to ISO 3864-1,
user information and fastening material.

Connection: Female thread G3/4

Safety-shower head with 5 nozzle orifices,
volumetric flow 30 l/min at 1 bar flow pressure
Item No.: 70-1740 35

Safety-shower head with 7 nozzle orifices,
volumetric flow 60 l/min at 1.5 bar flow pressure
Item No.: 70-1745 35

as above, however water feed from the rear out of the wall,
Connection: Male thread G3/4B,
Safety shower with 5 nozzle orfices.
Volumetric flow rate approx. 30 l/min at 1 bar flow pressure
Item No.: 70-1770 35

as above, however water feed from the rear out of the wall,
Connection: Male thread G3/4B,
Safety shower with 7 nozzle orfices.
Volumetric flow rate approx. 60 l/min at 1.5 bar flow pressure
Item No.: 70-1775 35

Illustration

Flow diagram

 


On request:
Different lengths/extensions.
Embodiment featuring wall bracket with eyelet for additional ceiling fixture.
Embodiment with ball handle instead of the triangular handle.
Embodiment with angled tie rod.
Other colours or colour combinations.

 

NovaLab safety shower with toggle valve and tie-rod actuation for surface mounting, water connection on all sides.
Guided by tie rod, with triangular handle and sealable. Actuated optionally right or left. Wall flange with toggle valve, wall bracket and safety-shower head.
Wall arm with safety-shower head with 5 or 7 jet orifices and swirl discs, automatic draining by gradient.
Replaceable nozzle distribution plate, nickel plated.
Axially sealing valve. Headwork can be replaced without removing the valve body. Fitting does not self-close.
Brass EPS-coated green RAL 6032
Meets the requirements of DIN EN 15154-1 and
BGI/GUV-I 850-0 "Safe working in laboratories".
Includes the "Safety shower" symbol on an adhesive label according to ISO 3864-1,
user information and fastening material.

Connection: Female thread G3/4

Safety-shower head with 5 nozzle orifices,
volumetric flow 30 l/min at 1 bar flow pressure
Item No.: 70-1840 35

Safety-shower head with 7 nozzle orifices,
volumetric flow 60 l/min at 1.5 bar flow pressure
Item No.: 70-1845 35

Illustration

Flow diagram

 

 

On request:
Different lengths/extensions.
Embodiment featuring wall bracket with eyelet for additional ceiling fixture.
Embodiment with ball handle instead of the triangular handle.
Embodiment with angled tie rod.
Other colours or colour combinations.

NovaLab safety shower with ball valve and tie-rod actuation, for installation in
on-site branch stub,
guided by tie rod, with triangular handle and sealable. Ball valve, wall bracket and safety-shower head. Wall arm with safety-shower head with 5 or 7 jet orifices and swirl discs, automatic draining by gradient. Replaceable nozzle distribution plate, nickel plated.
Fitting does not self-close. Brass EPS-coated green RAL 6032
Meets the requirements of DIN EN 15154-1 and
BGI/GUV-I 850-0 "Safe working in laboratories".
Includes the "Safety shower" symbol on an adhesive label according to ISO 3864-1, user information and fastening material.

Connection: Male thread G3/4B

Safety-shower head with 5 nozzle orifices,
volumetric flow 30 l/min at 1 bar flow pressure
Item No.: 70-1750 35

Safety-shower head with 7 nozzle orifices,
volumetric flow 60 l/min at 1.5 bar flow pressure
Item No.: 70-1755 35

Illustration

Flow diagram

 


On request:

Different lengths/extensions.
Embodiment featuring wall bracket with eyelet for additional ceiling fixture.
Embodiment with ball handle instead of the triangular handle.
Embodiment with angled tie rod.
Other colours or colour combinations.

NovaLab safety shower with toggle valve and tie-rod actuation, for installation in
on-site branch stub,
guided by tie rod, with triangular handle and sealable. Actuated optionally right or left. Toggle valve, wall bracket and safety-shower head.
Wall arm with safety-shower head with 5 or 7 jet orifices and swirl discs, automatic draining by gradient. Replaceable nozzle distribution plate, nickel plated.
Axially sealing valve. Headwork can be replaced
without removing the valve body. Fitting does not self-close.
Brass EPS-coated green RAL 6032
Meets the requirements of DIN EN 15154-1 and
BGI/GUV-I 850-0 "Safe working in laboratories".
Includes the "Safety shower" symbol on an adhesive label according to ISO 3864-1,
user information and fastening material.
Connection: Male thread G3/4B

Safety-shower head with 5 nozzle orifices,
volumetric flow 30 l/min at 1 bar flow pressure
Item No.: 70-1850 35

Safety-shower head with 7 nozzle orifices,
volumetric flow 60 l/min at 1.5 bar flow pressure
Item No.: 70-1855 35

Illustration

Flow diagram

 

 

On request:
Different lengths/extensions.
Embodiment featuring wall bracket with eyelet for additional ceiling fixture.
Embodiment with ball handle instead of the triangular handle.
Embodiment with angled tie rod.
Other colours or colour combinations.

NovaLab safety shower with ball valve and tie-rod actuation, for ceiling installation in
on-site branch stub,
guided by tie rod, with triangular handle and sealable. Ball valve, vertically offset shower arm and safety-shower head. Shower arm with safety-shower head with 5 or 7 jet orifices and swirl discs, automatic draining. Replaceable nozzle distribution plate, nickel plated. Fitting does not self-close. Brass EPS-coated green RAL 6032
Meets the requirements of DIN EN 15154-1 and BGI/GUV-I 850-0 "Safe working in laboratories".
Includes the "Safety shower" symbol on an adhesive label according to ISO 3864-1,
user information and fastening material.

Connection: Male thread G3/4B

Safety-shower head with 5 nozzle orifices,
volumetric flow 30 l/min at 1 bar flow pressure
Item No.: 70-1760 35

Safety-shower head with 7 nozzle orifices,
volumetric flow 60 l/min at 1.5 bar flow pressure
Item No.: 70-1765 35

Illustration

Flow diagram

 


On request:
Different lengths/extensions.
Embodiment with ball handle instead of the triangular handle.
Other colours or colour combinations.

NovaLab toggle valve with tie-rod actuation for ceiling mounting, guided by tie rod, with ball handle and sealable. Maintenance-free valve, axially sealing, not self-closing. Headwork can be replaced without removing the valve body. Position of the valve to the tie rod can be adapted to the respective installation conditions by rotating the headwork of the valve.
Brass EPS-coated green RAL 6032
Meets the requirements of DIN EN 15154-1 and
BGI/GUV-I 850-0 "Safe working in laboratories".
Includes the "Safety shower" symbol on an adhesive label according to ISO 3864-1,
user information and fastening material.
Without wall bracket and safety-shower head.
Volume flow approx. 60 l/min at 1 bar flow pressure.

Connection: Female thread G3/4

Item No.: 70-1800 35

Illustration

Flow diagram

 

 

On request:
• Different lengths.
• Design with triangular handle instead of the ball handle.
• Other colours or colour combinations.

NovaLab combination safety shower comprising body shower with tie-rod actuation and eye-wash and face-wash fountain, for wall mounting, water connection on all sides.
Guided by tie rod, with triangular handle and sealable. Wall flange with ball valve, wall bracket, safety-shower head, eye-wash fountain and face-wash fountain with wall bracket. Wall arm with safety-shower head with 5 or 7 jet orifices and swirl discs, automatic draining by gradient. Replaceable nozzle distribution plate,
nickel plated. Fitting does not self-close. Vertical connection pipe with wall flange to connect the eye-wash and face-wash fountain.
Brass EPS-coated green RAL 6032
Meets the requirements of DIN EN 15154-1 -2 and
BGI/GUV-I 850-0 "Safe working in laboratories".
Includes the "Safety shower" and "Eye-wash fountain" symbols on an adhesive label according to ISO 3864-1,
user information and fastening material.

Connection: Female thread G3/4Safety-shower head with 5 nozzle orifices,
volumetric flow 30 l/min at 1 bar flow pressure
Item No.: 70-1790 35

Safety-shower head with 7 nozzle orifices,
volumetric flow 60 l/min at 1.5 bar flow pressure
Item No.: 70-1795 35

as above, however water feed from the rear out of the wall,
Connection: Male thread G3/4B,
Safety shower with 5 nozzle orfices.
Volumetric flow rate approx. 30 l/min at 1 bar flow pressure
Item No.: 70-1710 35

as above, however water feed from the rear out of the wall,
Connection: Male thread G3/4B, 
Safety shower with 7 nozzle orfices.
Volumetric flow rate approx. 60 l/min at 1.5 bar flow pressure
Item No.: 70-1715 35

Flow diagram

 

 

On request:
Different lengths/extensions.
Embodiment with ball handle instead of the triangular handle.